Launch offer: add a second pattern and it is half price. The discount applies itself at checkout.Second pattern half price, applied at checkout USD $GBP £
Fit and sizing

How to choose a sewing pattern size (step by step)

By · Published

Kemi scoop-neck midi dress with pockets sewing pattern: a photo-realistic preview rendered from the CLO 3D pattern beside the skirt, bodice and pocket bag pattern pieces
Sew it: the Kemi scoop-neck midi dress with pockets · from $16.00

A note on measurements: this guide is written for US sewists, so it uses US units first: inches, yards and US paper sizes (Letter, 36 × 48 in). Metric equivalents are in brackets where they matter. If you're not used to US measurements, convert them before you cut: 1 in = 2.54 cm, 1 yd = 91.4 cm.

To choose a sewing pattern size, measure your full bust, high bust, waist and hip, find those numbers on the pattern’s body measurement chart, then check the finished garment measurements to see how much room the style adds. Pick your starting size from the part of the garment that is hardest to alter, usually the bust for dresses and tops and the hip for pants and skirts. This guide shows how to choose a sewing pattern size step by step, including what to do when your measurements land in different sizes.

Kemi sewing pattern on a 3D body in CLO 3D, front view, with its pattern pieces drawn to scale
Draped in CLO 3D: the Kemi with its pattern pieces, drawn to scale.

The most common mistake is buying or cutting the size you wear in stores. Pattern companies size from a measurement chart, not a label, and many sewists find their pattern size is one or two sizes larger than their store size. Your tape measure decides, not the letter on the tag.

Step 1: take your measurements

Measure over the underwear you plan to wear with the garment, with the tape level and snug but not tight. Write each number down in inches and centimeters so you can read any chart.

  1. Full bust: around the fullest part of the bust.
  2. High bust: high under the arms, above the bust and across the widest part of the back.
  3. Waist: at your natural waist, the narrowest point, usually about 1 in (2.5 cm) above the belly button. Bend sideways and the crease marks it.
  4. Hip: around the fullest part of the seat, usually 7 to 9 in (18 to 23 cm) below the waist.

For pants, also note your seated rise and inseam. The guide to taking body measurements for sewing shows where every measurement goes and how to avoid the usual errors.

Step 2: read the body measurement chart

Every pattern has a chart of body measurements for each size. Find your bust, waist and hip in it and note the size for each one separately. A typical result looks like this:

MeasurementYoursSize on the chart
Full bust38 in (96.5 cm)L
Waist31 in (79 cm)M
Hip41 in (104 cm)L

Don’t round down to the size you hoped for. If a measurement sits exactly on the border between two sizes, note both for now; the next step decides between them.

Check your cup size against the draft

Patterns are drafted for one bust shape. Simplicity’s sizing guide, for example, says its Misses patterns are drafted for a B cup, with a 2 in (5 cm) difference between high bust and full bust. Subtract your high bust from your full bust:

  1. Less than about 2.5 in (6.5 cm): choose your size by the full bust.
  2. About 2.5 in (6.5 cm) or more: match your high bust to the bust column of the chart instead. That size fits your shoulders, neckline and armholes, and you add room at the bust with a full bust adjustment.

Indie pattern companies may draft for a different cup size, so read the notes beside the chart if they mention one.

Step 3: check the finished garment measurements

The body chart describes you. The finished garment measurements describe the clothes. The difference between the two is ease, and it tells you how a style is meant to fit.

To use the numbers, subtract your body measurement from the finished measurement at the bust, waist and hip for each size you noted. If one size gives you comfortable ease everywhere, that’s your size. A second check helps too: lay a garment you like the fit of flat, measure it across the bust and double it, and compare that with the finished measurements.

Step 4: choose your starting size

Start from the area that is hardest to change after cutting.

  1. Dresses, tops and jackets: choose by the bust (or the high bust, from Step 2). Shoulders, necklines, armholes and sleeves are difficult to alter, so they should be right from the start.
  2. Pants and skirts: choose by the hip. A waist is easy to take in, or to grade, but a hip that is too tight can’t be fixed without extra fabric.
  3. Elastic-waist styles: choose by the hip and adjust the elastic length for your waist.
  4. Very loose styles: if the ease is generous everywhere, one size chosen by the bust or shoulders may be enough, with no blending.

When you fall between sizes

If the ease is generous, the smaller size often works. If the style is fitted, choose the larger size, because it’s easier to take in a seam than to let one out. When your bust, waist and hip fall in different sizes, you don’t have to choose one: you can grade between sizes by drawing a smooth new cutting line from one size to the next along the side seams.

Choosing a size for the Kemi midi dress

The Kemi midi dress shows how the steps work on a real pattern. Its fully lined bodice has front princess seams and back waist darts and sits on slim straps, so the bust and waist are the fitted areas. Its tea-length skirt is flat at the center front and back and gathered at the sides, which leaves plenty of room at the hip.

  1. Choose by the bust, or by the high bust if your cup is larger than the draft. The princess seams make a bust adjustment simpler than on a darted bodice, because you can shape the curve of the seam.
  2. Check the waist against the finished measurement. The bodice meets the skirt at the waist and closes with an invisible zipper at the center back, so the waist needs to fit closely.
  3. Don’t size up for your hips. The gathered skirt has ease to spare there, so the hip measurement rarely decides the size.

Kemi comes in sizes S–XXL. Like every Patterns by Nini PDF, it includes a size chart and finished measurements in inches and centimeters. The same approach works for its floor-length sister, the Nneka maxi dress. For pants such as the Tolu pleated pants, with a flat interfaced waistband at the natural waist, choose by the hip and grade the waist if it falls in a different size. Each product page also offers a pattern drafted to your measurements if you would rather skip the blending.

Common mistakes when choosing a pattern size

MistakeWhat happensFix
Choosing your store sizeGarment is too tightUse your measurements and the body chart
Reading the finished measurements as body measurementsGarment comes out a size too smallFind your size on the body chart first, then check ease
Choosing by full bust with a large cupShoulders and neckline gapeChoose by high bust and do a full bust adjustment
Choosing pants by the waistHips and seat are too tightChoose by the hip, then grade or adjust the waist
Measuring over bulky clothesSize comes out too bigMeasure over fitted underwear
Skipping the test square on a PDFEvery piece prints the wrong sizeCheck the test square before cutting

For a fitted style, or if you blended across more than one size, make a muslin in inexpensive fabric before cutting your real fabric. It costs an evening and shows any fit problem while it’s still easy to change.

Quick checklist

Frequently asked questions

Is my sewing pattern size the same as my store size?
Usually not. Sewing pattern sizes are based on a fixed body measurement chart, while store sizes vary by brand and are often more generous. Many sewists find their pattern size is one or two sizes larger than the size they buy in stores. Ignore the label you wear and choose the pattern size from your own tape measure results.
Should I choose a pattern size by bust or high bust?
Check the difference between the two. Many commercial Misses patterns are drafted for a B cup, roughly a 2 in (5 cm) difference between high bust and full bust. If your difference is about 2.5 in (6.5 cm) or more, choose by your high bust so the shoulders and neckline fit, then add room with a full bust adjustment.
What if I am between two sewing pattern sizes?
First compare the finished garment measurements with your body. If the style has plenty of ease, the smaller size may fit well. If it is fitted, choose the larger size, because taking in a seam is easier than letting one out. If different areas fall in different sizes, blend between them along the side seams.
What is ease in a sewing pattern?
Ease is the difference between your body measurement and the garment's finished measurement. Wearing ease is the minimum room you need to move and breathe in a woven garment. Design ease is extra room added for the look of the style, such as a loose shift or a full skirt. Stretch knits can have negative ease, meaning smaller than the body.

Sources

Your cart

Loading your cart…